INFLUENCE OF DEVIATIONS IN THE POSITION OF WHEEL PAIRS IN A FREIGHT-CAR ON THE GUIDING FORCES

Authors

DOI:

https://doi.org/10.32703/2617-9040-2022-40-6

Keywords:

wheel pair, flange contact, guiding forces, deviation of the positions, cart, guiding.

Abstract

The article puts forward a hypothesis according to which the violation of the nominal setting of wheel pairs in railway rolling stock carts is the main reason for the increase in guiding forces in the wheel flange contacts of the wheels of freight cars with the rails. Increased loads in wheel flange contacts are the cause of a number of other negative phenomena: increased intensity of wear (undercutting) of wheel flange, increased wear of the side surfaces of rail heads, decrease in the coefficient of stability of wagons from derailment, etc. To test this hypothesis, a study was conducted to obtain dependencies, first of all, these are the characteristics of the influence of geometric deviations of the position of the wheel pairs in the cart on the level of guiding forces in the contacts of the wheels with the rails and the wear of the wheel flanges. The relevance of this study is confirmed by data on the catastrophic wear of rails and solid-rolled wheels of wagons.
An analysis of statistical data oblique setting of wheel pairs in carts in plan due to running-in of side frames was made, which shows that in 80% of wagons these angles can be up to 0,015 rad (0,85 degrees). The formula for the critical derailment ratio of the frame force to the vertical load on the wheel has been clarified, in contrast to Nadal's formula, which additionally takes into account the deflection forces in the contact of the overlapping wheel.

References

Sokol, E.N. (2006). Sily prizhatiya grebnya kolesa k rel'su v pryamykh uchastkakh puti [The forces of pressing the wheel flange to the rail in straight sections of the track]. Zaliznychnyy transport Ukrayiny-Railway transport of Ukraine, 4, 63–66 [in Russian].

Kossov, V.S. (2000). Uluchsheniye usloviy vzaimodeystviya koles lokomotivov s rel'sami [Uluchsheniye usloviy vzaimodeystviya koles lokomotivov s rel'sami]. Zheleznyye dorogi mira - Railways of the world, 4, 36−38 [in Russian].

Vershinsky, S.V., Danilov, V.N., & Khusidov, V.D. (1991). Dinamika vagona: uchebn. dlya vuzov zh.d. transp. / Pod red.S.V. Vershinskogo. 3-ye izd. pererab. i.dop [The dynamics of the car: textbook. for universities railway transp. / Under the editorship of S.V. Vershinsky. 3rd ed. revised and.additional]. М.: Transport [in Russian].

Bogdanov, V.M., Kozubenko, I.D., & Romen, Yu.S. (1998). Tekhnicheskoye sostoyaniye vagona i iznos grebney koles [Tekhnicheskoye sostoyaniye vagona i iznos grebney koles]. Zheleznodorozhnyy transport - Railway transport, 8, 23–26. [in Russian].

Masliyev, V.H. (2018). Rozvytok teoriyi prohnozuvannya znoshennya hrebeniv kolis rukhomoho skladu zaliznytsʹ [Development of the theory of forecasting the wear of the wheel ridges of railway rolling stock.]. Visnyk Natsionalʹnoho tekhnichnoho universytetu «KHPI». Seriya: Transportne mashynobuduvannya - Bulletin of the National Technical University "KhPI". Series: Transport engineering, 29 (1305), 69–74 URL.: http://repository.kpi.kharkov.ua/handle/KhPI-Press/39234 [in Ukrainian].

Anofriyev, V.H. Korniyenko, V.V., Korobka, B.A., Kutishenko, O.V., Lashko, A.A., Mozheyko, Ye.R., Mokriy, T.F., Poznyakov, V.D., Savchuk, O.M., &Ushkalov, V.F. (2011). Doslidzhennya ta rozrobka kompleksu systemnykh tekhnichnykh rishenʹ vantazhnykh vahoniv novoho pokolinnya ta vprovadzhennya yikh u vyrobnytstvo ta ekspluatatsiyu (vytyah) [Research and development of a complex of system technical solutions of new generation freight cars and their introduction into production and operation (extraction)]. Vahonnyy park - Wagon park, 12, 49–55 [in Ukrainian].

Voronin, S.V., & Korostelev, Ye.N. (2014). Analiz sushchestvuyushchikh sposobov umen'sheniya bokovogo iznosa rel'sov v pare treniya koleso-rel's v krivykh uchastkakh puti [Analysis of existing ways to reduce the lateral wear of rails in a wheel-rail friction pair in curved track sections]. Ínformatsíyno-keruyuchí sistemi na zalíznichnomu transportí - Information and key systems on rail transport, 3, 22–27 URL.: http://surl.li/cyyja[in Russian].

Tkachenko, V., Sapronova, S., Kulbovskyi, I., & Fomin, O. (2017). Research into resistance to the motion of railroad undercarriages related to directing the wheelsets by a rail track. Eastern-European Journal of Enterprise Technologies, 5(7(89)), 65–72. URL.: https://doi.org/10.15587/1729-4061.2017.109791.

Sapronova, S., Tkachenko, V., Fomina, A., &Zub, Ie. (2016). Modelyuvannya reykovykh ekipazhiv i vplyv yikh konstruktyvnykh osoblyvostey na kinematychnyy opir rukhu [Modeling of rail carriages and the influence of their structural features on the kinematic resistance of movement.]. Transportni systemy i tekhnolohiyi - Transport systems and technologies, 29, 163-175. URL.: https://tst.ntu.edu.ua/index.php/tst/article/view/79. [in Ukrainian].

Pieringer, A., Baeza, L., & Kropp, W. (2015). Modelling of railway curve squeal including effects of wheel rotation. Noise and Vibration Mitigation for Rail Transportation Systems. Springer, Berlin, Heidelberg, 417-424. URL.: https://link.springer.com/chapter/10.1007/978-3-662-44832-8_50.

Dusza, M. (2015). The wheel-rail contact friction influence on high speed vehicle model stability. Transport Problems, 10(3), 74-86. URL.: https://bibliotekanauki.pl/articles/375369

Zeng, J., Wei, L., & Wu, P. (2016). Safety evaluation for railway vehicles using an improved indirect measurement method of wheel-rail forces. Journal of Modern Transportation, 24(2), 114-123. URL.: https://link.springer.com/article/10.1007/s40534-016-0107-5.

Zboiński, K. & Dusza, M. (2011). Extended study of rail vehicle lateral stability in a curved track. Vehicle System Dynamics, 49(5), 789-810. URL.: https://doi.org/10.1080/00423111003770447.

Ishida, H., Miyamoto, T., Maebashi, E., Doi, H., Iida, K., & Furukawa, A. (2006) Safety Assessment for Flange Climb Derailment of Trains Running at Low Speeds on Sharp Curves. Quarterly Report of Railway Technical Research Institute, 47(2), 65–71. URL.: https://trid.trb.org/view/782755.

Shabana, A. A. (2012). Nadal’s formula and high speed rail derailments. Journal of Computational and Nonlinear Dynamics, 7(4), 41-93. URL.: https://www.researchgate.net/publication/275377482_nadal%27s_formula_and_high_speed_rail_derailments

Published

2022-12-29

Issue

Section

Technics and techology

How to Cite

INFLUENCE OF DEVIATIONS IN THE POSITION OF WHEEL PAIRS IN A FREIGHT-CAR ON THE GUIDING FORCES. (2022). Transport Systems and Technologies, 40, 63-77. https://doi.org/10.32703/2617-9040-2022-40-6

Most read articles by the same author(s)

<< < 1 2