SCIENTIFIC APPROACH TO THE METHODS OF INCREASING THE LIFE CYCLE OF WHEELS OF RAILWAY VEHICLES
DOI:
https://doi.org/10.32703/2617-9040-2021-38-161-15Keywords:
wheel pair, life cycle, rolling stock, restoration, optimization, repair profile.Abstract
The value of the life cycle of rolling stock wheels is determined by the frequency of maintenance, in the process of which the turning is carried out to restore the profiles of the rolling surfaces, or the replacement of completely worn wheels. Traffic safety depends on the technical condition of the wheels of locomotives and wagons. Maintenance and repair of wheelsets accounts for about 30% of all costs of Ukrzaliznytsia's rolling stock repair units. Wheel repair technologies are based on the complete restoration of wheel profiles by turning, using which, their life cycle is reduced, and costs increase by 20% or more. The railways of Ukraine use an outdated, unreasonable, inefficient system of control over the formation of rolling surfaces in operation. Therefore, there is a need to create a scientifically sound approach to methods of extending the life cycle of the wheels of locomotives and wagons while ensuring the safety of railway rolling stock. According to the proposed scientific approach, the wheel profile is restored to optimal parameters, which provides an extended life cycle of wheelsets. As a result of the developed scientific approach the life cycle of wheel pairs will increase by 15… 25% and the expenses of the railway for their repair will considerably decrease.
References
ЛІТЕРАТУРА
Інструкція з формування, ремонту й утримання колісних пар тягового рухомого складу залізниць України колії 1520 мм. Відомчий нормативний документ 32.0.07.001.2001 (нова редакція). Київ: Державна адміністрація залізничного транспорту України. Укрзалізниця, 2011. 168 с.
Yann Bezin a and Björn A. Pålsson. (2021). A Hybrid Multi-Criteria Decision Making Model for Defect-Based Condition Assessment of Railway Infrastructure. Vehicle system dynamics. URL.: https://doi.org/10.1080/00423114.2021.1942079.
Сапронова, С.Ю. Технологічний знос бандажів коліс локомотивів, як фактор впливу на їх ресурс. Вісник
Східноукраїнського нац. ун-ту ім. В. Даля. Луганськ: СНУ ім. В. Даля, 2008. №2 (120). С. 292–295.
Сотніков, К.М., Морозов, В.О. Технічне обслуговування та ремонт вагонів: навчальний посібник. Харків. ТО «Ексклюзив», 2014. 204с.
Пат. 25091 Україна. МПК В 23 С 5/11, 5/14. Фасонна фреза для відновлення профілю колеса рухомого складу залізничного транспорту / Колот В. О., Малиновський М. Д., Лишаєв Г. П., Сергієчко М. І., Кортун С. А., Колот О. В.; заявник і патентовласник ЗАТ «МІНЕТЕК», Державна адміністрація залізн. трансп. України. № 97041796 ; заявл. 16.04.97 ; опубл. 25.12.98. Бюл. № 6.
RAFAMET S.A. Железнодорожное оборудование. 2009. URL.: http://www.8e.ru/firms/f1471.php.
Технологическая инструкция по плазменному упрочнению гребней колесных пар тягового подвижного состава. К.: Министерство транспорта. Укрзалізниця, 1998. 8 с.
Johansson, A. & Nielsen J.O. (2003). Out-of-round railway wheels-wheel-rail contact forces and track response derived from field tests and numerical simulations. Proc IMechE, Part F: J Rail and Rapid Transit, 217, 135–146.
Shevtsov, I.Y., Markine, V.L. & Esveld C. Shape Optimisation of Railway Wheel Profile under Uncertainties. 12.
URL.: http://www.railway-research.org/IMG/pdf/354.pdf
Сапронова, С.Ю., Ткаченко, В.П., Зуб, Є.П. Ресурсозбереження при відновленні коліс рухомого складу залізниць. Вісник Східноукраїнського національного університету ім. В.Даля. Сєверодонецьк: Вид-во СНУ ім. В.Даля, 2017. №3[233]. С.183-189. Режим доступу: http://nbuv.gov.ua/UJRN/VSUNU_2017_3_36
Правила технічного обслуговування, ремонту та формування колісних пар вантажних вагонів СТП 04-
:2015, затверджених наказом Державної адміністрації залізничного транспорту України від 11.11.2015 № 483-Ц. К.: Державна адміністрація залізничного транспорту України, 2015.
Інструкція з огляду, обстеження, ремонту та формування вагонних колісних пар ЦВ-ЦЛ-0062. Київ: Київське
ПКТБ по вагонах, 2005. 103 с.
Grassie, S.L. (1996). Models of railway track and vehicle/track interaction at high frequencies: results of benchmark test. Veh Syst Dyn, 25, 243–262.
Enblom R. & Berg M. (2005). Simulation of railway wheel profile development due to wear - influence of disc braking and contact environment. Wear, 258, 1005–1063.
Зуб Є.П., Сапронова С.Ю., Ткаченко В.П. Аналіз систем моніторингу параметрів зносу колісних пар рухомого складу залізниць. Збірник наукових праць ДУІТ. Серія «Транспортні системи і технології». 2019. Вип. 1(33). Т.1. С. 107-117. URL.: https://doi.org/10.32703/2617-9040-2019-33-1-10
Ignesti, M., Innocenti, A., Marini, L., Meli, E. & Rindi, A. (2013). Development of a wear model for the wheel profile optimisation on railway vehicles. Vehicle System Dynamics. 51, 1363–1402. URL.: https://www.tandfonline.com/doi/abs/10.1080/00423114.2013.802096
Ye, Y., Qi, Y., Shi, D., Sun, Y., Zhou, Y. & Hecht, M. (2020). Rotary-scaling fine-tuning (RSFT) method for optimizing railway wheel profiles and its application to a locomotive. Railway Engineering Science. 28, 160–183. URL.: https://link.springer.com/article/10.1007/s40534-020-00212-z
Polach, O. & Nicklisch, D. (2016). Wheel/rail contact geometry parameters in regard to vehicle be-haviour and their alteration with wear. Wear. 366-367, 200–208. URL.: https://www.sciencedirect.com/science /article/abs/pii/
S0043164816300199?via%3Dihub
Kassa, E., Andersson, C. & Nielsen J.C.O. (2006). Simulation of dynamic interaction between train and railway turnout. Veh Syst Dyn, 44(3), 247–258.
REFERENCES
Instruktsiya z formuvannya, remontu y utrymannya kolisnykh par tyahovoho rukhomoho skladu zaliznytsʹ Ukrayiny koliyi 1520 mm. Vidomchyy normatyvnyy dokument 32.0.07.001.2001 (nova redaktsiya). [Instruction on formation, repair and maintenance of wheel pairs of traction rolling stock of the railways of Ukraine of a track of 1520 mm. Departmental normative document 32.0.07.001.2001 (new edition)]. Kyiv: Derzhavna administratsiya zaliznychnoho transportu Ukrayiny. Ukrzaliznytsya [State Administration of Railway Transport of Ukraine. Ukrzaliznytsia], 2011. 168 s. [in Ukrainian].
Yann Bezin a and Björn A. Pålsson. (2021). A Hybrid Multi-Criteria Decision Making Model for Defect-Based Condition Assessment of Railway Infrastructure. Vehicle system dynamics. URL.: https://doi.org/10.1080/00423114.2021.1942079.
Sapronova, S.Yu. (2008). Tekhnolohichnyy znos bandazhiv kolis lokomotyviv, yak faktor vplyvu na yikh resurs [Technological wear of locomotive wheel tires as a factor influencing their resource]. Visnyk Skhidnoukrayinsʹkoho natsionalʹnoho universytetu im. V. Dalya [Bulletin of the East Ukrainian National University. V. Dahl], 2 (120). 292–295. [in Ukrainian].
Sotnikov, K.M., Morozov, V.O. (2014). Tekhnichne obsluhovuvannya ta remont vahoniv: navchalʹnyy posibnyk [Maintenance and repair of wagons: a textbook]. Kharkiv. TO «Eksklyuzyv», 2014. 204 p. [in Ukrainian].
Patent 25091 Ukrayina. MPK V 23 S 5/11, 5/14. Fasonna freza dlya vidnovlennya profilyu kolesa rukhomoho skladu zaliznychnoho transport [Shaped mill for restoration of a profile of a wheel of a rolling stock of railway transport] / Kolot V. O., Malynovsʹkyy M. D., Lyshayev H. P., Serhiyechko M. I., Kortun S. A., Kolot O. V.; zayavnyk i patentovlasnyk ZAT «MINETEK», Derzhavna administratsiya zalizn. transp. Ukrayiny. № 97041796 ; zayavl. 16.04.97; opubl. 25.12.98. Byul. № 6. URL.: https://base.uipv.org/searchINV/search.php?action=viewdetails&IdClaim=49334 [in Ukrainian].
RAFAMET S.A. Railway equipment. 2009. URL.: http://www.8e.ru/firms/f1471.php.
Tekhnologicheskaya instruktsiya po plazmennomu uprochneniyu grebney kolesnykh par tyagovogo podvizhnogo sostava [Technological instruction for plasma hardening of wheelset flanges of traction rolling stock]. К.: Ministry of transportation. Ukrzaliznytsya, 1998. 8 p. [in Russian]
Johansson, A. & Nielsen J.O. (2003). Out-of-round railway wheels-wheel-rail contact forces and track response derived from field tests and numerical simulations. Proc IMechE, Part F: J Rail and Rapid Transit, 217, 135–146.
Shevtsov, I.Y., Markine, V.L. & Esveld C. Shape Optimisation of Railway Wheel Profile under Uncertainties. 12. URL.: http://www.railway-research.org/IMG/pdf/354.pdf
Sapronova, S.Yu., Tkachenko, V.P., & Zub, Ye.P. (2017). Resursozberezhennya pry vidnovlenni kolis rukhomoho skladu zaliznytsʹ [Resource conservation in the restoration of wheels of railway rolling stock]. Visnyk Skhidnoukrayinsʹkoho natsionalʹnoho universytetu im. V.Dalya [Bulletin of the East Ukrainian National University. V.Dal]. Syeverodonetsʹk: Vyd-vo SNU im. V.Dalya, 2017. №3[233]. 183-189. URL.: http://nbuv.gov.ua/UJRN/VSUNU_2017_3_36 [in Ukrainian].
Pravyla tekhnichnoho obsluhovuvannya, remontu ta formuvannya kolisnykh par vantazhnykh vahoniv STP 04-001:2015, zatverdzhenykh nakazom Derzhavnoyi administratsiyi zaliznychnoho transportu Ukrayiny vid 11.11.2015 № 483-TS. K.: Derzhavna administratsiya zaliznychnoho transportu Ukrayiny [State Administration of Railway Transport of Ukraine], 2015. [in Ukrainian].
Instruktsiya z ohlyadu, obstezhennya, remontu ta formuvannya vahonnykh kolisnykh par TSV-TSL-0062. Kyyiv: Kyyivsʹke PKTB po vahonakh, 2005. 103 p. [in Ukrainian].
Grassie, S.L. (1996). Models of railway track and vehicle/track interaction at high frequencies: results of benchmark test. Veh Syst Dyn, 25, 243–262.
Enblom R. & Berg M. (2005). Simulation of railway wheel profile development due to wear - influence of disc braking and contact environment. Wear, 258, 1005–1063.
Zub, Ye.P., Sapronova, S.Yu. & Tkachenko, V.P. (2019). Analiz system monitorynhu parametriv znosu kolisnykh par rukhomoho skladu zaliznytsʹ [Analysis of systems for monitoring the parameters of wear of wheel pairs of railway rolling stock]. Zbirnyk naukovykh pratsʹ DUIT. Seriya «Transportni systemy i tekhnolohiyi» [Collection of scientific works of DUIT. Transport Systems and Technologies series], 2019, 1(33), 1. 107-117. URL.: https://doi.org/10.32703/2617-9040-2019-33-1-10
Ignesti, M., Innocenti, A., Marini, L., Meli, E. & Rindi, A. (2013). Development of a wear model for the wheel profile optimisation on railway vehicles. Vehicle System Dynamics. 51, 1363–1402. URL.: https://www.tandfonline.com/doi/abs/10.1080/00423114.2013.802096
Ye, Y., Qi, Y., Shi, D., Sun, Y., Zhou, Y. & Hecht, M. (2020). Rotary-scaling fine-tuning (RSFT) method for optimizing railway wheel profiles and its application to a locomotive. Railway Engineering Science. 28, 160–183. URL.: https://link.springer.com/article/10.1007/s40534-020-00212-z
Polach, O. & Nicklisch, D. (2016). Wheel/rail contact geometry parameters in regard to vehicle be-haviour and their alteration with wear. Wear. 366-367, 200–208. URL.: https://www.sciencedirect.com/science/article /abs/pii /S0043164816300199?via%3Dihub
Kassa, E., Andersson, C. & Nielsen J.C.O. (2006). Simulation of dynamic interaction between train and railway turnout. Veh Syst Dyn, 44(3), 247–258.
Downloads
Published
Issue
Section
License
Copyright: This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
